Adjusting the Monitor
{943SW/943SWX} Direct Functions
AUTO
When the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the
animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values
of Fine, Coarse and Position are adjusted automatically.
(Available in Analog mode only)
If auto adjustment does not work properly, press 'AUTO' button again to adjust picture
with more accuracy.
If you change resolution in the control panel, auto function will be executed automatically.
OSD Lock & Unlock
When pressing the AUTO button after locking the OSD
43
Downloaded from ManualMonitor.com Manuals
