Samsung SyncMaster 17GLi, Руководство пользователя, Страница: 14 / 28

G /D Geometric Distortion )
First Function : Pincushion / Trapezoid
Push this button once to adjust the pin-
cushion and trapezoid of the display.
l
Pincushion control
Push G / D button once to display the pin-
cushion OSD. To adjust the vertical sides
of the display from bowing in ( pincushion
) or bowing out ( barrel distortion ), use the
left and right buttons until the
sides are straight.
l
Trapezoid control
Push G / D button once to display the pin-
cushion OSD. Push either the up or
down ( button to display the trapezoid
OSD. Use the up (A) and down
but-
tons again to correct any trapezoid
distortion of the display.
Second Function : Parallel/ Tilt
Push this button twice to adjust the
parallel and tilt of the display.
l
Parallel control
Push G / D button twice to display the par-
allel OSD. Adjust the parallel of the dis-
play with the left
and right (
buttons.
l
Tilt control
Push G / D button twice to display the tilt
OSD. Push either the up ( or down
button to display the tilt OSD. Use the up
) and down ( buttons again to cor-
rect the tilt of the display.
9. Color Temperature
Use this button to choose the color tem-
perature of the display. After pushing the
color temperature button, use the up
or down ( button to select between
9300°K color ( channel 1 ) and 6500°K color
( channel 2 ).
10. Recall
Use this button to recall factory mode set-
tings. When you push the recall button,
the indicator LED changes color from
green to orange ( the same as any other
function ) and the OSD appears.
Hold down the recall button for several
seconds, or until the indicator LED’s color
changes to green. A green LED indicates
that the factory settings for that timing
have been recalled. The OSD shows the
progress of the recall function.
Note: This operation resets all of the data
in the user memory area for the current
timing signal.
11. Degauss
Magnetic fields can build up on the CRT
and cause color impurity. Use the degauss
button to demagnetize the CRT. Push the
button once to activate the degaussing cir-
cuit. The degaussing circuit automatically
turns itself off after a few seconds.
Warning: Don’t push the degauss
button for longer than 5 seconds. If you do,
this operation resets all of the data in the
user memory area. If this occurs, you must
remake your user adjustments.
ENGLISH
12