manualshive.com logo in svg

Samsung SW85ASP, Руководство по обслуживанию

Поделиться
Скачать
Samsung SW85ASP Скачать руководство пользователя страница 30

6-1

6. TROUBLE DIAGNOSIS

-   As the washing machine which has the micom processor, is configured of the complicated structure, 
  there might be many kind of the service call from the consumer even though there is no defect on the 
  parts in the machine. Below information is prepared for the exact trouble diagnosis and the suitable 
  repaire guide.

6-1. Precautions for the Repair and Replacement

Please observe and follow the below instruction for the trouble diagnosis and parts replacement.

(1) As the electric components are easily damaged by the static electricity charged in the resin part of the 
  machine or in the human body, be sure to remove the potential difference between the human body the 
  washing machine by touching the earth strap or the power supply which is connected to the machine if 
  you need to contact PCB parts for servicing.

(2) The wiring should be properly connected in accordance with the wiring diagram. Erroneous wiring may 
  cause the faulty operation, smoke, or fire. Speial attention should be paid to connection, insulation treat
  ment, and wiring work for the lead wire.
(3) Be sure to pull out the power plug during repair.
(4) Be sure to use only authoirzed replacement  parts.
(5) Be careful that touching the radiating plate accidentally may cause electric shock, because AC 110V-
  220V is applied between T1 and T2 of the triac on the PCB assembly.
(6) As the parts on PCB are coated with urethane, they can not be inspected by the test bar on the 
  multimeter. Check them normal or not by using the test mode first and then diagnose the trouble in an 
  appropriated procedure as next troubleshooting method.

Power Plug

Earth Strap

Содержание SW85ASP


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды