manualshive.com logo in svg

Samsung SW82ASP, Руководство по обслуживанию

Поделиться
Скачать
Samsung SW82ASP Скачать руководство пользователя страница 26

5-3

5-2-2. DISASSEMBLY

Warning! To avoid risk of electrical shock, personal injury or death, disconnect the power to the washing 

machine.

Disassembly Procedure

Illustration

■

 

Removing the PCB Assembly

1)

 

Remove the Screw to fix the Cover-T.C.

2)

 

Lift up the Cover-T.C with the Control-Panel assembled.

3)

 

Turn the Cover-T.C “up”.

4)

 

Disconnect the Wire Harness from each electrical parts.

5)

 

Remove the 4 Screws connecting the Control Panel with

 

 

the Cover-T.C. and then dissemble the Control Panel.

6)

 

Remove the 5 Screws connecting the Control Panel with

  

 

the PCB Assembly.

7)

 

Disconnect the Wire Harness of the PCB Assembly.

8)

 

Pull away the PCB Assembly.

9)

 

Do the reassembly in reverse order.

 

■

 

Removing the Pressure-Senser, Water-Valve, and Checker

 

Assembly

■

 

Pressure Senserl

1)

 

Pull out the Lead Wire Terminal of the Pressure Digital.

2)

 

Remove the Pressure Digital.

3)

 

Pull out the Air Hose.

■

 

Water Valve

1)

 

Pull out the Lead Wire Terminals.

2)

 

Remove the Water valve while pushing it in the direction of  

 

 

the arrow.

■

 

Checker Assembly

1)

 

Pull out the Lead Wire Terminals.

2)

 

Remove the two Screws.

3)

 

Lift out the Checker.

■

 

Wire Harness

1)

 

Pull out the Lead Wire Terminals from the parts in back of

  

 

the Top Cover.

2)

 

Pull out the Lead Wire Terminals from the PCB after 

  

 

dissemble the Control-Panel from the Cover-T.C.

3)

 

Remove the Wire Harness.

■

 

Door Switch <Magnet Switch>

1)

 

Turn over the top-cover.

2)

 

Remove the screw.

3)

 

Remove the door switch.

Содержание SW82ASP


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды