- 9 -
MANUAL FUNCTIONS
Sterilization and anti-bacteria coating are optional depending on the selection
or no selection of stroke. (Nano silver system operates only when hydration is
selected.)
■
CLEANING THE TUB
1. Press the POWER button.
2. Press the PROGRAM button to select the SOAK course.
You can select the water supply or temperature (hot/cold).
3. Press the WATER LEVEL button to select HIGH.
4. Press the START/HOLD button.
5. Add a dedicated detergent and close the lid.
INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
■
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration
occurs. (Allowable is 1
°
)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly
exposed to rain. Moisture may destroy the electrical insulation causing an
electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the
washer near furnaces, boilers, etc. Do not place under direct sunlight.
■
LEVELLING
•
If the washer is not leveled with the ground, it makes the machine tremble
more or be out of order. So, make sure that the washer is leveled properly.
WASH ONLY
Press the POWER button.
Press the WASH button.
Press the START/HOLD button.
Washing goes on for 20 minutes.
When the WASH button is pressed during washing, the
wash time can be changed to between 6 and 30
minutes in duration.
RINSE ONLY
Press the RINSE button.
Press the START/HOLD button.
Rinsing goes on for 2 times.
When the RINSE button is pressed during rinsing, the
rinse times can be changed to between 1 to 5 times in
duration.
SPIN ONLY
Press the SPIN button.
Press the START/HOLD button.
Spin drying goes on for 10 minutes.
When the FUNCTION button is pressed during
spinning, the spin time can be changed to from 1 to 9
minutes.
WASH AND RINSE
Press the WASH and RINSE button.
Press the START/HOLD button once.
Detects the amount of laundry, and determines wash
and rinse time period automatically.
When the WASH and RINSE button is pressed during
working. Wash time period is determined between 6
and 30 minutes, and rinse time is determined between 1
and 5 times.
RINSE AND SPIN
Press the RINSE and SPIN button.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the RINSE and SPIN button is pressed during
working. The number of rinse times is determined
between 1 and 5, and spin time period for drying is
determined between 1 and 9 minutes.
WASH, RINSE AND SPIN
Press the WASH, RINSE AND SPIN button.
Press the START/HOLD button once.
WASH, RINSE AND SPIN is performed.
- Never place laundry in the tub when cleaning inside the tub, as this can
cause discoloration or damage to the laundry.
- When doing the laundry after cleaning the tub, you may find some impurities.
These are just detergent residues and impurities after the tub cleaning.
Perform the rinse cycle two to three times.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
•
Open the lid of the machine, pour water into the
tub up to the level just below the pulsator, and
adjust the legs so that the pulsator is positioned
at the center of the water as shown in the figure.
•
Place the machine more than 10cm away from
the wall.
•
Adjust the legs on feet
WATER
SW85ASP-01976C-GB Page 9 Monday, August 14, 2006 6:32 PM
