6. How to Disassemble
6-1 PCB-Ass’y Replacement
1)
Remove the two cover-screws on the control-panel as
shown in the figure, and then remove the 2 screws.
2)
Push the control-panel to the front as shown by the arrow
in the figure and pull it upward to separate.
3)
Turn over the control-panel ass’y and remove the 5 screws
on the PCB Ass’y.
4)
Raise the ass’y gently to the direction to which the screws
are removed in order to separate the ass’y.
5)
Separate the connector connected to the Ass’y PCB.
❈
While separating the control-panel, be cautious not to
stretch the wire excessively. While in assembling, ensure
that the wire is not caught in the groove of the top-cover.
❈
While assembling the PCB, make sure the it is properly
fastened by the fastening hook of the control-panel. If not,
the selection S/W will not work.
❈
Checkpoint after replacing the PCB-Ass’y
Check that each component works properly. (using the test
mode)
20
SAMSUNG WASHING MACHINE
