Washing for the first time
Before washing clothes for the first time, you must run
a complete cycle without clothes. To do this:
1.
Turn the Program Selector Knob to the
“3” position.
2.
Pour a little detergent into compartment
in the detergent drawer.
3.
Turn on the water supply to the washing machine.
4.
Press the Start button.
•
This will remove any water from the manufacturer’s test
run remaining in the machine.
Washing a Load of Laundry
SAMSUNG
Washing Machine Owner
’
s Instructions
9
Operating Instruction
1.
Open the door and put the laundry (sorted by fabric type) into the drum
without overfilling, and close the door
2.
Put the detergent and, if necessary, softener or prewash detergent, in the
appropriate compartments.
3.
Select the desired program using Program Selector Knob. Turn the Knob
in either direction to select fabric type, wash temperature.
4.
Turn the Spin Speed Selector Knob to select the desired spin speed or
rinse hold.
SW1050 : 1000, 800, 600, 400, Rinse Hold, No spin
5.
Select the special option, if required, according to the degree of soil or
type of fabric.
The pilot lamp will light up to show that the option is selected.
SW1050 : Quick Wash, Rinse Plus, Prewash, Eco Wash
6.
Press the Start button and the wash cycle will begin.
When the cycle is finished
The machine stops automatically. The machine is fitted with a safety device the
prevents opening of the door for about 2-3 minutes after the end of program.
Open the door and remove the laundry.
8
SAMSUNG
Washing Machine Owner
’
s Instructions
Washing a Load of Laundry
