manualshive.com logo in svg
background image

What is a MAGIC SPEED?

 

 

The MAGIC SPEED provides a function that user optionally chooses the disc reading speeds, 

high speed (Max speed) mode

 and 

low noise (X32) mode.

 

The 

low noise mode

 offers the best PC environment by minimizing a driving noise. 

 
The 

Magic speed

 not only functions to decrease a noise by reducing a reading speed but also gets a 

preventive effect of a disc breakage, which could be occurred by a high speed. Its purpose is to supply 
the stable PC environment to user. 

 

Explanation of MAGIC SPEED Mode and Ways to use

Explanation of MAGIC SPEED Mode

The Maximum Speed Mode : 

Set up this mode when you want to read a disc by the maximum 

                                                      speed which is supplied by a drive.

The Low Noise Mode : 

Set up this mode when you want to read a disc by a stable speed, 

                                          the low speed (X32).

The mode selected and set using the Magic Speed feature does not change when you connect 
the driver to a different PC. Make sure you check the settings before use.

 

Caution

: In case of a cracked disc, the disc would be broken if operating in the maximum speed. 

                  Therefore, it is recommended to operate in the low noise mode or to immediately make 
                  a copy and use it.

Ways to Use the MAGIC SPEED

The first of all, please install the 

Magic Speed

 program from Samsung's homepage.

Operate the program by clicking the right mouse button on the MAGIC SPEED 

Tray Icon

.

Select a desired mode from a program window, and click 

"Setup"

 The reading speed of a drive 

operates in a selected mode.

Close the program window by selecting 

"Close"

At this time, the reading speed will keep operating by the changed speed unless you would change a 
mode and would end a program. 

 

It is recommended to use a "Maximum Speed Mode" when operating a Data Copy & a Disc Copy and 
to use a "Low Noise Mode" when operating a general operation.

Other Function

 

Method to release an automatic operation: This program automatically operates when PC is booting. If 
you wish to release the automatic operation, release the selected item, Automatic Operation in the 
Tray Icon menu. 

 

Place to download a MAGIC SPEED

 Samsung's Customer Service Homepage 

(URL:www.samsungODD.com)

 

- Select a Firmware > MAGIC SPEED.
 

Connecting the Cables

Using the Drive

Содержание SW-252S

























Отзывы: