Using the Timer Programming Feature
34
GB
The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the OK button to select
Standard
option.
Result:
The
TIMER PROGRAMMING
menu is displayed.
3
Press
❿
to select the input source.
4
Select the required station by pressing the
,
❷
buttons or
INPUT SEL. to select the AV1, AV2 or AUX input sources.
5
Press
❿
to select the recording day.
6
Select the required day by pressing the
or
❷
buttons.
7
Press
❿
to select the recording start time.
8
Select the required hour value by pressing the
or
❷
buttons.
9
Press
❿
to select the minutes.
10
Select the required minute value by pressing the
or
❷
buttons.
11
Press
❿
to select the recording stop time.
12
Select the required recording stop time by pressing the
or
❷
buttons, following the same procedure as when selecting the
recording start time.
13
Press
❿
to select the recording speed.
14
Press the
or
❷
buttons to select the
SP
(Standard Play),
LP
(Long Play),
Auto
(Auto Tape Speed Select) recording speeds.
15
Press the
or
❷
buttons to toggle between the PDC
mode (marked
On
) and the non PDC mode (marked
Off
).
16
When you have finished, press the RETURN button.
17
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
VCR
OPEN/CLOSE
STANDBY/ON
17
Standard
ShowView
Timer Method
