background image

Dynamic Compression

PCM Down Sampling

49

GB

DVD

DVD

Dynamic Compression constrains the dynamic range, i.e. the
difference between the quietest and loudest passages of a DVD
soundtrack. This enables you to limit loud noises, such as
explosions, or raise the volume of quiet passages, such as
whispering, while watching a movie. This is convenient for
viewing movies late at night. 

1

Open “MENU”

With the DVD in stop mode, press the MENU button.

2

Select “DVD”

Use the 

or 

buttons to highlight “DVD ” 

then press the OK or  

buttons.

3

Select “Audio Setup” 

Highlight “Audio Setup,” then press the OK or 

buttons.

4

Set “Dynamic Compression”

Highlight “Dynamic Compression,” then press the OK or 

buttons to select one of the following options:

• On - The total dynamic range of the DVD soundtrack will be

compressed, so quiet passages will be louder and loud
passages will be softer.

• Off – The original dynamic range will be preserved.

DTS

Dolby Digital Out

MPEG-2 Digital Out

PCM Down Sampling

 Setup

 Setup

 Setup       :

 Display Setup

Off
On

DTS

Dolby Digital Out

MPEG-2 Digital Out

PCM Down Sampling

 Setup

 Setup

 Setup       :

 Display Setup

Off
On

1

Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2

Select “DVD”

Use the 

or 

buttons to highlight “DVD ” 

then press the OK or  

buttons.

3

Select “Audio Setup” 

Highlight “Audio Setup,” then press the OK or  

buttons.

4

Set “PCM Down Sampling”

Highlight “PCM Down Sampling”, then press the OK or 

buttons

to select one of the following options:

• Off – When the disc with 96K of Audio disc insert in, it will 

output 96K without any change.

• On - When the disc with 96K Audio inserted in, it will downsize

96K to 48K and output it.

Содержание SV-DVD440










































































Отзывы: