Alignment and Adjustments
2-9
Samsung Electronics
2-3-2 Tape Transport System Adjustment
When parts are replaced, perform the required adjustments by referring to procedures for the tape transport
system. If there are any changes to the tape path, first run a T-120 tape and make sure excessive tape wrinkle does
not occur at the tape guides.
◆
If tape wrinkle is observed at the guide roller S, T, turn the guide roller S, T until wrinkle disappears.
◆
If the tape wrinkle is still observed at the tape guide, perform the tilt adjustment of the ACE head.
(1) ACE Head Assembly Adjustment
a. ACE HEAD HEIGHT ADJUSTMENT
1) Run the alignment tape (Color bar) in the playback mode.
2) Observe surface of the audio head using a dental mirror.
3) Turn screw (C) clockwise or counterclockwise until the gap of lower tape edge and the lower edge of the
control head is about 0.25mm. (Refer to Fig. 2-10 and 2-11)
Fig. 2-10 Location of ACE Head Adjustment Screw
Fig. 2-11 ACE Head Height Adjustment
SCREW (A)
TLIT ADJUST
X-POSITION
ADJUSTING SLIT
SCREW (C)
HEIGHT ADJUST
SCREW (D)
X-POSITION LOCKING
SCREW (B)
AZIMUTH ADJUST
0 ~ 0 .25 mm
AUDIO HEAD
VIDEO HEAD
CONTROL HEAD
Содержание SV-DVD340/DVD540ASV-DVD545
Страница 24: ...2 16 Alignment and Adjustments Samsung Electronics MEMO ...
Страница 34: ...Exploded View and Parts List 3 10 Samsung Electronics MEMO ...
Страница 48: ...Block Diagram 5 2 Samsung Electronics This Document can not be used without Samsung s authorization MEMO ...
Страница 64: ...Schematic Diagrams 6 16 Samsung Electronics This Document can not be used without Samsung s authorization MEMO ...