Samsung SV-C90P, Руководство пользователя

Страница: 8 / 29

4
VCR Setup
AUDIO OUT (L/R)
Use to output audio signals to
connected equipment.
CH 3/4
Set to channel 3 or 4
to match the channel
selected at the TV.
IN FROM ANT
Use to input cable or
antenna signal.
OUT TO TV
Use to output VCR
signal to TV. VIDEO OUT
Use to output video
signal from VCR to
connected equip-
ment.
Use the jacks on the rear panel to connect the VCR to other components and signals, including:
VCRs, TVs, stereo equipment, digital video components, antenna and cable signals.
75-ohm round
antenna lead
300-ohm flat
antenna lead with adapter
Cable/Antenna
IN TO VCR
VCR
OUT TO TV
Antenna Connection
If your outside antenna cable is a 300 ohm flat feeder, use
an adapter to connect the antenna to the VCR input termi-
nal. You can purchase an adapter at an electronics store. If
your antenna already has a round lead, simply connect it to
the terminal on the rear panel of the VCR.
Once your antenna is connected to the VCR, connect a
cable from the VCR to your TV from the “Out to TV”
terminal on the rear panel of the VCR.
Cable Connections
Basic Cable TV Connection
This set-up will enable you to:
- Record an unscrambled channel.
- Watch an unscrambled channel while recording it.
- Record an unscrambled channel while watching
another (only when you connect a cable-compatible TV).
You will need to:
• Select TV channel 3 or 4 to receive video
signals.(See page 9.)
• To record a channel while watching another, press
TV/VCR on the remote control to set the VCR to TV
mode and select a desired channel on the TV.
Rear Panel
Connections