Samsung SV-260B, Инструкция по эксплуатации

Страница: 21 / 26

37 36
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding œ , ❷ or
➛
,
❿
buttons to select the
EASY OPERATION option.
3
Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4 Press the corresponding
œ
or
❷
buttons, until the
REPEAT PLAY option is selected.
5
To... Press
➛
or
❿
, until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
You can set interval repeat play to repeat the cassette several times
for special interval.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding œ , ❷ or
➛
,
❿
buttons to select the
EASY OPERATION
option.
3 Press the OK button to select this option.
Result:
The EASY OPERATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
NO. OF INTERVAL REPEAT option is selected.
5
To... Press
❿
, until...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play OFF is displayed.
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
“ INTERVAL REPEAT SETTING ” is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
The tape is automatically rewound to the start point.
“
INTERVAL REPEAT ” is displayed.
Interval Repeat Play
Auto Repeat Play
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
œ❷
❿
END: MENU
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
œ❷
❿
END: MENU
BONUS
Using the Tape Counter
0:00:00
CLR/RST F.ADV INDEX
TV VCR INPUT
REPEAT
VOL PROG/TRK
AUDIO
REC MENU
DISP./
SELECT
-/--
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
TRK PROG
UDIO
REC MENU
DISPLAY
2
2
2
2
The tape counter:
◆
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆
Is reset when a cassette is inserted in the VCR
◆
Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a sequence:
◆
Press DISP./ or DISPLAY twice to display the counter
◆ Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
◆
Start playback or Recording.
◆
Press the
■
button.
◆
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➛➛
or
❿❿
.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆
Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆
Four times to clear the display
★
(SV-260B/SV-260X)
★
(SV-665B/SV-660B/
★
( SV-460B/SV-265B/
★
( SV-665X/SV-460X/
★
( SV-660X)
GB GB