UTP Transmitter & Receiver
User's Manual
4
UTP Transmitter & Receiver
User's Manual
5
1. Product Introduction
1-1. Overview
2-1. Part Names and Functions
1-2. Product Features
The UTP Video Transmitter & Receiver (SUT-80, SUR-10) converts the imbalance differential
signals of CCTV cameras to balanced differential signals and transmit them via twisted pair
cable (UTP, FTP, STP), enabling long-distance signaling without the interference of differential
noise. Our UTP video transmitter & receivers are also capable of supplying power to
connected cameras and transmitting camera control data using an extra cable.
VIDEO IN :
Connect the video output terminal of a camera.
CAM POWER :
The power output terminal for a camera.
Do not connect a camera that uses a different power supply. (In case a
different power supply is used, please connect the enclosed load resistor.
)
RS-485 :
RS-485 data terminal. Caution: Polarity sensitive.
POWER IN :
Connect an extra adapter.
Do not use if the receiver and junction box are used for the supply power.
UTP CABLE :
Connect a UTP cable attached with an RJ-45 plug.
CABLE LENGTH :
Adjust the software according to the length of the UTP cable.
Max Distance Low (L): ~600m / (H): 600~2.4km
POWER LED :
A red light turns on when the SUT-10 is powered on.
POWER IN :
The adapter terminal.
· Provides differential signaling for video, power, and data transmission using 1 UTP cable
· Minimizes the interference of various transmission noises
· Provides BNC harness for the user’s convenience
· 2-level distance adjustment switch (Low: ~600m, High: 600~2.4km)
· Max B/W via UTP cable: 2.4km, Max color: Differential video signaling up to 1.5Km when set to High)
· Provides AMP & F.EQ gain adjustments for optimal video quality
· Double duty power options: AC 24V 300mA & DC 12V 500mA (SUT-80: DC48V only)
· Convenient wiring options using RJ-45 Connector
· Compatible with the older models of CVBS out cameras CVBS in DVRs, monitors, and dividers
· Compatible with most UTP cameras and DVRs
· Light, compact size perfectly fit into housings
· When used with the SUJ-800, supplies power to a connected camera within 1km
(Output current: DC 12V MAX 300mA; only DC-voltage cameras are compatible)
2. Product Parts and Peripheral Device Connection
2-1-1. SUT-80
2-1-2. SUR-10
