![Samsung SUNBURST SGH-A697 Series Скачать руководство пользователя страница 55](http://html2.mh-extra.com/html/samsung/sunburst-sgh-a697-series/sunburst-sgh-a697-series_user-manual_4748063055.webp)
Changing Your Settings 51
Vibration Feedback
You can set the level of vibration intensity that occurs when you
touch the screen.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Vibration Feedback
.
2.
Drag the
Vibration Intensity
slider to the intensity level you
desire (range is 0-4).
3.
Touch
Save
.
Calibration
The Calibration feature allows you to re-align the screen’s touch
accuracy. Use this feature only when the device does not respond
properly when you touch the screen.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Calibration
.
2.
Touch the center of each target and repeat this step for all
four targets displayed.
3.
At the
Calibration completed. Save new setting?
prompt,
touch
Yes
to save or
No
to cancel.
Note:
When touching the screen in Calibration mode, you must touch the
center of the cross hair area.
Motion Detection
The Motion Detection feature can be used for muting an
incoming call or alarm, setting Snooze on an alarm, and starting
and restarting a timer.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Motion Detection
.
2.
Touch
On
to activate the Motion Detection feature, or touch
Off
to deactivate it.
For more information on using Motion Detection on your phone,
see the following:
•
To mute the ringer - see
“Other Answering Options”
on page 29.
•
To mute an alarm - see
“Turning Off an Alarm”
on page 141.
•
To start or restart a timer - see
“Timer”
on page 146.
a697 Crescent.book Page 51 Wednesday, April 14, 2010 4:20 PM