Maintenance
10_
Maintenance
To maintain maximum cleaning performance, the following maintenance
steps must be performed:
1. Empty the Dust Bin when the dirt reaches the
“MAX” line on the side.
2. Cleaning the Grille Cyclone when the Dust Bin
become clogged.
3. Check the Pre-Motor Filter at least once a month
and clean or replace as needed.
4. Replace the Post-Motor Filter every three to six
months.
Note :
More frequent filter cleaning or replacing
may be necessary if you are vacuuming new
carpet, fine dust, or have allergy concerns.
Follow the instructions on the following pages
to perform these simple maintenance steps.
EMpTY DUST BIN
The Dust Bin needs to be emptied when the dirt reaches the “MAX” line on the
side of it.
1. Unplug cleaner from electrical outlet.
2. To remove the Dust Bin from the vacuum body, push the Dust Bin release
button as shown.
3. Hold dust bin and push down bin release empty button to empty dirt into
garbage container as shown.
Note :
The Dust Bin may be washed in warmwater with
a mild detergent. Reassemble and makesure it
is completely dry before using again.
cLEANING THE GRILE
If the suction is weak although the dust bin is empty, open the cover and clean the Grille.
Note :
Whenever the Grille is clogged, check the pre-motor filter and clear it.
WARNING
To reduce the risk of electronic
shock, turn Power Switch OFF
and disconnect polarized plug
from electrical outlet before
performing maintenance or
troubleshooting checks.
Tip:
For maximum cleaning
performance, check and
clean or replace all filters as
suggestsd.
Grille
Cyclone
Содержание SU3486
Страница 15: ...memo _15 Memo ...