Samsung SU33xx SERIES Скачать руководство пользователя страница 10

Страница: 10 / 12

①

②

③

WARNING

To reduce the risk of injury

from moving parts, turn

off vacuum cleaner and

disconnect Power Plug from

electrorical outlet.

①

②

10_

maintenance

Maintenance

maintenance

_11

cHEck ROTATINg bRUSH ANd dRIVE bElT

You should check your vacuum cleaner’s Rotating Floor

Brush and Drive Belt regularly for wear or damage. You

should also clean the brush and brush ends of strings,

hair, and carpet fibers. These can wrap around the

brush and hamper its ability to effectively clean your

carpet. Also remove any debris that has accumulated

under the brush cover.

1. Unplug the Vacuum Cleaner from electrical outlet.

2. Place handle in Low position and turn vacuum

cleaner over so bottom side is up.

3. Remove the six screws as shown with screwdriver.

Lift the Brush Cover off.

4. Grasp Rotating Floor Brush at both ends and lift.

5. Clean strings, hair and other debris from Rotating

Floor brush, paying particular attention to brush

ends.

6. Clean strings, hair and other debris from Motor

Pulley and Drive Belt areas.

7. Check Drive Belt carefully for wear, cuts or

stressed areas.

8. Check Air Passageway for obstructions. Remove

debris from this area.

Replace drive belt

1. Unplug cleaner from electrical outlet.

2. With Rotating Floor Brush removed from vacuum

cleaner grasp old Drive Belt and remove from

Motor Pulley. Discard old Drive Belt.

3. Place new Drive Belt over Motor Pulley and stretch

other end over Rotating Floor Brush in the space

between the bristles.

4. Place ends of Rotating Floor Brush down into slots

on sides as shown.

5. Turn Rotating Floor Brush by hand several times

in the direction of Motor Pulley. If properly installed,

Drive Belt will center itself on Rotating Brush

crown.

6. Reposition Brush Cover and screws. Insert the

hook on the Brush Cover into the corresponding

groove on the brush and tighten scerws securely.

WARNING

Be careful of your hands when you replace the drive belt, to avoide physical

injury from sharp plastic film.

Motor

pulley

brush

cover

Air

passageway

Hook

DJ68-00450A(0.1)-EN-0906.indd 10

2008.9.6 2:3:41 PM

Содержание SU33xx SERIES













Результаты поиска

Содержание SU33xx SERIES

Отзывы:

Бренды по названию

Популярные бренды

Samsung SU33xx SERIES, Руководство пользователя

Результаты поиска

Содержание SU33xx SERIES

Отзывы:

Бренды по названию

Популярные бренды