12_
maintenance
maintenance
_13
03 M
AINTENAN
c
E
Maintenance
brushbar Replacement
1. Remove the tool from the hose, and turn upside down.
Slide the switch to unlock position and remove bottom
plate.
2. Unscrew the one screw and remove belt guard.
3. Remove brushbar including end plates and discard.
4. Inspect belt to ensure that it is in good condition. If broken
or cracked, please replace. (See below for details.)
5. With the curved ends facing down, slide end plates of
brushbar into slots on the tool.
6. To replace bottom plate, insert the four tabs on edge of
bottom plate into slots on front of tool. Pivot bottom plate
down and snap closed.
belt Replacement
1. Grasp turbine and pull firmly to remove.
2. Remove a screw, and lift the cover belt off.
3. Remove belt from turbine pulley. Replace with new belt.
4. With flat sides of turbine retainers pointing down, slide
retainers into grooves in tool housing and snap into place.
5. Replace brushbar and bottom plate.
cleaning brushbar
•
Cut off pet hairs or threads surrounding brush with
scissors.
MINI TURbO bRUSH
Содержание SU33 SERIES
Страница 15: ...memo _15 Memo ...