English
11
INITIALIZATION
initialization
OUTPUT FORMAT
You can adjust the output format of the numeric values from the keypad.
You can select 4/8 bit Burst or 34bit Wiegand.
Adjust the format according to the controller receiving the keypad input.
To change the output format, use the switch on the rear of the
product.
See the table below to make adjustment as needed.
Output Format
SW #1
SW #2
Output Format of Card
Output Format of Keypad
ON
ON
34bit W RS-232
34bit RS-232
ON
OFF
34bit W RS-232
34bit RS-232
OFF
ON
34bit W RS-232
4 bit Burst
OFF
OFF
34bit W RS-232
8 bit Burst (Default)
All switches are defaulted to “OFF”.
Before you change the output format, you must disconnected the power.
1.
2.
❖
M
ON
1
2
