setting up
_07
01 SETTING
UP
1.
With the Freezer door closed, remove the upper
hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
2.
Remove hinge screws
3
and the ground screw
4
by turning counter-clockwise, and take off the
upper hinge
5
. Be careful that the door does not
fall on you as you are removing it
3.
Next, remove the door from the lower hinge
6
by carefully lifting the door straight up
7
.
Be careful not to pinch the water tubing and
wire harness on the door.
4.
Remove the lower hinge
8
using a hex wrench.
REMOVING THE
REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the doors.
1. Removing the Front Leg Cover
First, open both the freezer and refrigerator doors,
and then take off the front leg cover by turning the
three screws counter-clockwise.
Separating the Water Supply Line
from the Refrigerator
1.
Remove the water line by pressing the coupler
1
and pulling the water line
2
away.
Do not cut the water line. Gently separate it
from the coupler.
2. Removing the freezer door
A few things to mention fi rst.
•
Make sure that you lift the door straight up so the
hinges are not bent or broken.
•
Be careful not to pinch the water tubing and wire
harness on the door.
•
Place doors on a protected surface to prevent
scratching or damage.
1
2
2
1
3
4
5
7
6
DA99-02028A (EN)-10.indd 07
DA99-02028A (EN)-10.indd 07
13. 6. 19.
10:25
13. 6. 19.
10:25
