background image

The Installation Space

Selecting the best location for the refrigerator

• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator doors to open easily.
•  Allow sufficient space to the right, left, back and top for air circulation. If the Refrigerator does not have 

enough space, the internal cooling system may not work properly.

• Please ensure that appliance can be moved freely in the event of maintenance & service.

FLOORING

For proper installation, you must place this refrigerator 

on a level, hard surface that is the same height 

as the rest of the floor. 

This surface should be strong enough to support 

a fully loaded refrigerator, or approximately 359lbs 

(165kg). To protect the finish of the flooring, cut a 

large section of the cardboard carton and place 

it under the refrigerator where you are working. 

When moving the refrigerator, you need to pull 

and push it straight forwards or back. 

Do not wiggle it from side to side.

CAUTION

95mm

50mm

50mm

OPUS1-간단메뉴얼(RFG26M***).indd   2

2011.4.26   11:26:28 AM

Содержание SRF731GDLS







Отзывы: