manualshive.com logo in svg

Samsung SRD-442, Руководство пользователя, Страница: 12 / 124

Поделиться
Скачать
Samsung SRD-442 Скачать руководство пользователя страница 12

12_

 

installation

installation

Please take note of the followings before using this product.

• 

Do not use the product outdoor. 

• 

Do not spill water or liquid in the connection part of the product.

• 

Do not impose the system to excessive shock or force.

• 

Do not pull out the power plug forcefully.

• 

Do not disassemble the product on your own.

• 

Do not exceed the rated input/output range.

• 

Use a certified power cord only.

• 

For the product with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

Samsung Digital Video Recorder (“DVR” hereinafter) is a 
state-of-art security device, and contains mass storage hard 
disk(s) and critical circuits inside.

When the temperature rises inside the product, the product 
may breakdown and the product life be shortened.

HDD ADDITION

Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product 
damage.
Please consult your provider for further information on HDD installation since improper installation or settings may 
damage the product.

 

Number of HDDs supported :  Default 1 HDD + Up to 1 HDD added

 

Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

 

J

 

Cautions for data loss (HDD care)

Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this DVR product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user’s carelessness or miss use.

 

Cases might cause damage to HDD or recorded data

To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
Data may be lost due to external impacts during disassembly or installation of the DVR.
HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation.
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.

One Year: 24HR X 365 DAY =8,760 HR

Temperature
Unit: ºC

Life (Unit: HOURS)

Содержание SRD-442





























































































































Отзывы:

Нет отзывов