Samsung SRD-1652D, Руководство пользователя

Страница: 64 / 126

64_ using the DVR
using the DVR
Mailing Service
You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.
If an event occurs with a channel where the camera’s video is set to < OFF > or the remaining recording count is set
to < OFF >, only the text notifi cation will be sent to the applicable email address.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
In the < Network > setting window, press the up/down
( ) button to move to < Mailing Service > and press the
[ ENTER ] button.
Select < SMTP >.
You will see the SMTP setting window.
Use direction buttons (
◄ ►
) to move to a desired item
and set the value.
ServerType : Displays the connected server type.
Server : Enter a server to connect to.
Port : Sets the communication port.
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
User : Enter a user to use authentication when connecting to the SMTP server.
Password : Enter the password of the SMTP server user.
Secure Transfer : Select one from < Never > and < TLS (if available) >.
Sender : Use the virtual keyboard to enter the sender’s e-mail address.
Refer to “ Using Virtual Keyboard ”. (Page 36)
TEST : Conducts the test on the server settings.
When the SMTP setting is done, press < OK >.
Event Setting
You can set the interval and type of the event that will be sent to the user.
Using the mouse may help make setup easier.
In the < Network > setting window, press the up/down
( ) button to move to < Mailing Service > and press the
[ ENTER ] button.
Select < Event >.
Use direction buttons (
◄ ►
) to move to a desired item
and set the value.
Event Interval : Set the event interval.
If a series of events occurs, the e-mail will be sent at the specifi ed
interval, not on each event.
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
When the event setting is done, press < OK >.
M

1.
2.
3.
•
•
•
•
•
•
•
•

•
4.
1.
2.
3.
•

•
4.
Mailing Service
SMTP
Event
OK Cancel
Use Authentication
Group Recipient
x
ServerType SMTP mail Server
x
Server
x
Port 25
x
User
x
Password
********
x Secure Transfer Never
x
Sender ex. user@example.net
TEST
Mailing Service
SMTP
OK Cancel
Recipient
x
Event Interval 10 min
Use Event Transfer
Sensor Motion
Change P/W HDD Info Video Loss
Power On/Off Manual Record
Event
Group