manualshive.com logo in svg

Samsung SR8930, Руководство пользователя, Страница: 11 / 45

Поделиться
Скачать
Samsung SR8930 Скачать руководство пользователя страница 11

safety information 

_11

01

 

S

afety informa

tion

cAutIoN

do not move the robotic vacuum cleaner holding the dustbin 

part.

 

- This may cause the dustbin to separate, resulting in injury or 

serious damage to the product.

Note

Vacuum cleaning robot may not be able to continue its 

operation if it is stuck at the entrance or veranda doorsill.

 

- To resume operating, turn the Power Switch off and then on again 

after moving it to a location where it can continue cleaning.

Note

Vacuum cleaning robot cannot completely clean locations that 

it cannot reach, such as corners, and spaces between sofas 

and walls.

 

- Please clean these locations occasionally.

Note

dust clusters may remain after cleaning, when the vacuum cleaning robot fails to 

pick up dust clusters that were formed while cleaning.

 

- In this case, sweep up the dust with another cleaning tool.

CLeaninG anD maintenanCe

cAutIoN

When cleaning the product, do not spray water directly onto 

the exterior or wipe it with a volatile material such as benzene, 

thinner or alcohol.

 

- This may result in critical damage to the product.

cAutIoN

the unit must not be disassembled or reconstructed by anyone 

other than a qualified service engineer.

 

- This may result in damage to the product.

WARNING

Remove any foreign substances accumulated on the obstacle 

and cliff sensors on a regular basis.

 

- Dirt accumulated on the sensors will result in inaccurate 

functioning of the sensors.

Cliff sensor

obstacle sensor

Содержание SR8930














































Отзывы:

Нет отзывов