29
Call Functions
28
Call Functions
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, press the
Option
soft key,
and select the
Hold
option. You can reactivate the
call whenever you want, by pressing the
Retrieve
soft key.
To make a call while you have a call in
progress, proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options
soft key, followed by the
Hold
option.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap
soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing .
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the
Call Waiting
menu
option (
5-2-3
) to
Active
(see page 91). You will be
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. If you want to switch between the two calls,
press the
Swap
soft key.
If you want to end a held call, press the
Options
soft key and select the
End held
option.
3. To end the current call, press .
Any held calls will automatically be reconnected
to you.
03-N100-Call 10/12/00 3:43 AM Page 28
Содержание SPH-N1000
Страница 71: ...13 N100 Glossary 10 12 00 3 54 AM Page 136 ...
Страница 72: ...13 N100 Glossary 10 12 00 3 54 AM Page 138 ...