Phone Basics
15
Phone Basics
1.
Make sure your phone is on.
2.
Enter a phone number. (If you make a mistake while dialing,
press
to erase one digit at a time. Press and hold
to erase the entire number.)
3.
Press
to call.
4.
Press
or close the phone when you are finished.
Tip
:
To redial your last call, press
twice.
You can also place calls from your phone by using Voice Command
(page 78), Speed Dialing numbers from your Contacts (page 22), and
using your Call History listings (page 43).
Answering Calls
To answer an incoming call:
1.
Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2.
Press
to answer an incoming call. (Depending on your
phone’s settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See “Call
Answer Mode” on page 110 for more information.)
Your phone notifies you of incoming calls in the following ways:
•
The phone rings or vibrates (unless set to Silence All).
•
The LED flashes.
•
The backlight illuminates.
•
The screen displays an incoming call message.
