29
H
ea
lth and
sa
fety infor
m
ati
on
operating positions accepted by the FCC with the
phone transmitting at its highest certified power level
in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the limit established by the
government adopted requirement for safe exposure.
The tests are performed in positions and
locations(e.g., at the ear and worn on the body) as
required by the FCC for each model.
The highest SAR values of this model phone as
reported to FCC are Head Max: 0.977 W/Kg, Body
Max: 1.01 W/Kg for Part 24 CDMA 1900 MHz and Head
Max: 1.12 W/Kg, Body Max: 0.737 W/Kg for Part 22
CDMA 800 MHz(AMPS/CDMA Mode).
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID A3LSPHA560.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard incorpo-
rates a substantial ma gin of safety togive additional pro-
tection for the public and to account for any variations in
measurements.
Содержание SPH-A560
Страница 1: ...CDMA TELEPHONE SPH A560 Draft 2005 1 27 ...