Samsung SP-R6100 Скачать руководство пользователя страница 41

Страница: 41 / 67

When you are viewing received numbers,

Options

appears

above the left soft key to allow you to access the received
call options, described in the following paragraphs.

Accessing the Options

1. Press the

Options

soft key when it appears. The options

are displayed.

2. Press the

soft key until a desired option is selected.

The selected option is in bold type.

3. Press the

Select

soft key.

Save Book

You can save the selected number in your Phonebook memory.
Enter the name for the number and press the

soft key.

Then choose the address number and press the

Select

soft

key.

Erase

When you are asked to confirm that you want to erase the
selected number, press the

Yes

soft key. The selected number

will be erased.

All Erase

When you are asked to confirm that you want to erase all
numbers, press the

Yes

soft key. All received numbers will be

erased.

Received Calls

Received Calls Options

Содержание SP-R6100




































































Результаты поиска

Содержание SP-R6100

Отзывы:

Samsung SP-R6100, Руководство пользователя, Страница: 41 / 67

Результаты поиска

Содержание SP-R6100

Отзывы: