background image

4

Digital Cordless Telephone

5

Digital Cordless Telephone

10. Clean the charge points with a dry cloth from time to time.

11. Ringer Equivalence Number (REN)-1.0.

The REN is a customer guide indicating approximately the
maximum number of items of apparatus that should be
connected simultaneously to the line. The sum of REN’s of
the individual items should not exceed a total value of 4. 

12. You can use this equipment to make 999, 112 emergency

calls. 

13. You can use this equipment on a telecommunication sys-

tem that uses Loop Disconnect or DTMF signalling.

It is strongly recommended that the equipment is config-
ured to use DTMF signalling for access to public or private
emergency services. DTMF signalling also provides faster
call setup.

14. If you are connected to a Private Branch Exchange, you

may have to press a digit, for example “9”, to get an out-
side line. Then you dial as normal. If you need a pause,
you should insert it after the digit and before the number
you require.

15. You may sometimes experience problems in making calls.

These difficulties can include:

• Line connection problems.

• Problems hearing the conversation on both ends of the

line.

16. This equipment will NOT work at all if the mains or bat-

tery supply is removed.

17. You can connect the equipment to the telecommunication

systems specified as long as you follow the instructions in
this manual. 

18. This equipment has been approved for use with the fol-

lowing facilities:

• Last Number Redial.

• Call Barring.

• Memory Dial.

Any other use will invalidate the approval of the equip-
ment and it then ceases to comply with the standards
against which approval was granted.

19. SAVE THESE INSTRUCTIONS.

Содержание SP-R5200



























Отзывы: