
|
Basic Settings
|
Connecting the Power
|
Connecting an External Device
|
1. Rear of Projector
Plug the power cord into the power terminal on the rear of the projector.
|
Basic Settings
|
Connecting the Power
|
Connecting an External Device
|
Connecting a PC using the D-Sub cable
Check that your PC and projector are turned off.
Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-Sub terminal of your PC using the D-Sub cable.
- For the supported input signals, refer to
"PC Timing(D-Sub/HDMI)"
.
Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector to the Audio out terminal of your PC
using an audio cable (Not supplied).
Connecting a PC using an HDMI/DVI cable