Convenient features
■
Convenient features for making calls
39
Redial the recently dialed number
Deleting the recently dialed number
Dialing another number after a call (Flash)
Pause function
■
Convenient features during calls
41
Hold function during calls / Recording calls
■
Convenient features for auto-answering
42
Functions used in auto-answering
Checking caller s voice
Far distant usage of the auto-answering (Remote control)
Selecting the number of rings for remote control
Registering password for remote control
Functions table for remote control
Function table for remote set
■
Help functions
47
Flash time adjustment
Selecting pulse/tone dial type
Resetting/Adjusting screen brightness
Long distance call
Noise reduction/Out of range/Low voltage warning
Initializing the phone
Registering the remote set number
Registering additionally purchased remote set.
Convenient features
38
�
Start recording (for 20 seconds)
To Record Your Voice for Auto-answering
(Using the Base Set (OGM))
1 2
5
4
3
Selecting an Active Message from Some Recorded Messages
(Using the Base Set)
1 2
5
4
3
6
6
7
This means that the message is too short - less than 3
seconds. In this case, please try to record it again.
The recording will not be done properly if you are
recording either too close to or too far from the mike.
Try to keep about 30 cm from the mike.
When the recording does not work
or
Original message user’s message
Recording screen
You will hear the
recorded voice once
and after that the
setting is confirmed.
You will hear
a voice
confirming the
completion of
the setting.
To end the recording
(press button)
37
�
Auto-answering
(continue)
Original message is the basic
message set as original:
“
I am not
available right now, please leave a
message after a ding-dong-deng sound.
”
User’s message is the message
recorded by the user.
�
Press
button.
�
Press
button.
