8
4.
When the battery is fully charged, the phone displays a
message telling you the battery is full. Remove the
connector from the phone.
Warning!:
If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger. Using excessive force when pressing on the touch screen
may damage the tempered glass surface and void the warranty.
For more information, refer to
Note:
Failure to unplug the wall charger before you remove the battery can
cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
) blinks and the device sounds a
warning tone at regular intervals. In this condition, your phone
conserves its remaining battery power, not by turning off the
backlight, but by entering the dimming mode. For a quick check
of your battery level, glance at the battery charge indicator
located in the upper-right corner of your device’s display. Five
bars (
) indicate a full charge.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1.
Press and hold
or
until the phone switches on.
The phone launches the activation splash screen and then
proceeds to search for the network. Once the network has
been found, you can make or receive calls.
Note:
The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
2.
Press and hold
, until the phone switches off.
Locking the Touch Screen
1.
Push the Lock Key
(on the upper right side of the
phone) downward to lock the touch screen.
2.
Push the Lock Key
downward to unlock the touch
screen.
– or –
Touch and hold
on the Idle screen to unlock the touch
screen.
a817 Blink.book Page 8 Monday, October 4, 2010 10:03 AM
