E
9
E
8
Installing SOC-420(P)/SOC-220(P)
SOC-420(P)/SOC-220(P) - Pin Configuration
1. Choose an installation site that can sufficiently support a minimum of five times
the net weight of the equipment to be installed (approx. 800g for the SOC-
420(P) and 500g for the SOC-220(P)).
2. Install the provided mounting bracket and then connect
one end of the cable to the rear of the camera. When
doing this, arrange the cable so that it won't get
damaged or caught on anything.
3. Connect the other end of the cable to the monitor or other accessory equipment.
4. Use the handle on the mounting bracket to direct the camera to the area you
want to monitor.
1
DATA+
2 VIDEO_OUT
3
GND
4
DATA-
5
AUDIO_OUT
6
VDD
7
GND_V
8
CH_SEL
8 ... 1
