setup screen
64_
setup screen
•
Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
•
Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
4.
When done, click [
Apply (
)
].
Alarm input
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Alarm input
>.
3.
Specify an input device.
•
Type
- Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal Close : It is normally
closed, but if it is open, an alarm
will be triggered.
4.
Specify the <
Activation time
>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[
] : Reset all settings.
5.
Specify an operation that will perform if an alarm occurs.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
•
E-mail sending : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
6.
When done, click [
Apply (
)
].
Содержание SNV-5080R
Страница 1: ...NETWORK CAMERA User Manual SNV 5080R ...
