Samsung SNR-6400, Руководство пользователя

Страница: 59 / 112

User’s Manual
57
the web or the setup program. The Source Ethernet Port connects to the cameras. The
Storage Ethernet Port connects to NAS devices.
In relation to Monitor Ethernet Port, you can set the connection port number and http port. The
http port is used to connect to the product via Web Viewer. If you changed the default value
(80) for HTTP Port, then you must append "(your port number)" to the product's address when
connecting to your product with Web Viewer. For example, if your IP address is 192.168.1.110
and HTTP Port is 8080 then http://192.168.1.110:8080 is the product access address for Web
Viewer. The connection port is used to connect your computer to the product after the http
connection is established.
You can activate or disable ATC in the ATC Mode menu. ATC automatically adjusts the video
quality depending on the network's connection status.
Note
The ATC mentioned in "4.6.4. Camera Setup"(Page 47) is to apply ATC to the
communication between a camera and the product. The ATC in this Network
Setup screen is to apply ATC to the communication between your computer and
the product.
Monitor Ethernet Port supports DDNS. By registering your product with a DDNS server, you
can connect to the Monitor Ethernet Port from outside by using the DDNS server ID, instead of
the product's IP address. If you are using either PPPoE or DHCP to connect to the Monitor
Ethernet Port, you'll be assigned a n`ew IP address each time you connect the product to the
network. DDNS is especially useful in these circumstances.
Note
Using DDNS
1. Register as a member on iPOLiS home page (www.samsungipolis.com).
2. Log in, and register your SNR-6400/3200 with the product registration menu
in MY IPOLIS. (Be sure to check for duplicate domains when you register
your domain.) You can check if your product has been registered normally on
the Product List.
3. Next set DDNS Use to "Enable,” enter "www.samsungipolis.com" in Server
Domain (without the quotation marks), and finally type in the ID and password
you registered with at the iPOLiS home page.
4. You can view the connection status for your registered product(s) on iPOLiS
Product List. ("ON" means that the product is connected to DDNS.)
5. Click Connect to Product on the Product List to connect to your product.