Samsung SNR-3200 Скачать руководство пользователя

Страница: 60 / 112

Network Video Recorder SNR-6400/3200

6. You also can enter http://www.samsungipolis.com/ID in your Internet

browser's address bar to connect to your product. ("ID" is the domain you

chose when you registered your product.)

Source Ethernet Port can act as a DHCP server to assign an IP address to a connected

camera. Enter two IP addresses—the first and last addresses of an IP range—to limit the

range of dynamic IPs. This DHCP Server option is especially useful when you want to open

only the SNR-6400/3200 to an external network and keep the connected cameras within the

internal network.

Note

To use the DHCP Server, the connection method for Source Ethernet Port must

be set to Static IP.

Note

The front network port (Config Ethernet Port) is fixed as IP 192.168.1.100,

HTTP Port 80, Connection Port 4000; you cannot change this setting.

When connecting to the system via the Monitor Ethernet Port instead of the

Config Ethernet Port, changing the settings of the Monitor Ethernet Port may

terminate the connection. If this happens, you must use the new address to

connect to the product.

All ports use the same DNS server; you can have up to two DNS servers. DNS1 is used as the

default, and DNS2 is used when DNS1 is unavailable.

Using RTP/RTSP lets you watch the video of the SNR-6400 in the monitoring system without

using Web Viewer. To use RTP/RTSP, select "Enable" in the Use RTSP menu, and then

change the RTSP and RTP port numbers in the Settings menu. (RTSP is used to control video,

and RTP is used to transfer video data.)

The Multicast option is useful when sending video to multiple users simultaneously without

consuming too much bandwidth. Multicast is available only within a local network that is

configured with a multicast-enabled router; it cannot be used via the Internet.

Note

The RTSP port number cannot be identical to the number of the connection

port for the Monitor Ethernet Port.

Please be advised that you should not change the address unless you are

familiar with the RTP multicast protocol. The default Multicast address is
224.0.1.1.

RTSP monitoring is applied only to a MPEG-compliant camera. (H.264 and

JPEG-compliant cameras are not supported)

Содержание SNR-3200

















































































































Результаты поиска

Содержание SNR-3200

Отзывы:

Похожие инструкции для SNR-3200

Бренды по названию

Популярные бренды

Samsung SNR-3200, Руководство пользователя

Результаты поиска

Содержание SNR-3200

Отзывы:

Похожие инструкции для SNR-3200

Бренды по названию

Популярные бренды