Samsung SNO-7084R, Руководство пользователя

Страница: 109 / 180

QoS
You can specify the priority to secure a stable transfer rate for a specific IP.
1. From the Setup menu, select the
< network ( ) > tab.
2. Click < QoS >.
3. Click the [ add ( ) ] button.
The IP list will be created.
4. Enter an IP address to which you will
apply QoS.
M
`
The default prefix for IPv4 is 32;
For DSCP, the default is set to 63.
`
Only the IP addresses that are set to < Use > can be prioritized.
5. Select an IP to delete from the list.
Click the [ Delete ( ) ] button.
6. When done, click [ apply ( ) ].
Snmp
With the SNMP protocols, the system or network admin can monitor the network devices
on a remote site, and configure the environment settings.
1. From the Setup menu, select the
< network ( ) > tab.
2. Click < Snmp >.
3. Specify the < Snmp >.
• Enable SNMP v1 : SNMP version 1
will be active.
• Enable SNMP v2c : SNMP version 2
will be active.
- Read community : Provide the
name of the read community where
you can access to the SNMP information.
The default name is < public >.
- Write community : Provide the name of the write community where you can
access to the SNMP information. The default name is < write >.
English _109
●
Setup
Screen