English
_15
web viewer
connectInG to tHe camera
1.
Enter the network camera address into
the Internet browser (Explorer browser)
address bar to connect to the camera.
`
The camera is set to receive an IP address that is automatically assigned from the DHCP server when
it is released from the factory.
If there is no DHCP server, the IP address is set to 192.168.1.100.
To change the IP address, use the IP installer.
Instructions for using the IP installer are provided in the SNB-6005 manual.
2.
At the initial access, a dialogue window appears that asks you to install a viewer (Please
click Yes to install STW Web Viewer).
3.
After installing the web viewer, set a
password using the screen shown on the
right.
4.
After setting a password, enter a user ID/
password using the screen shown on the
right.
`
User ID: admin
Password: the password you have set
5.
When you are successfully logged in, the
settings screen and the camera screen
are displayed on the web viewer as
shown on the right.
PT01-004490A-SNO-6095RH-ENGLISH.indd 15
2016-03-28 오후 4:05:51
