To use Motion detection
It detects a motion that meets all conditions specified by sensitivity, size and area.
1.
Select a motion detection mode.
2.
Select <
Sensitivity
> tab to set the
sensitivity level. You can set the sensor’s
sensitivity to detect a motion out of the
background from the monitoring video.
J
In a situation that definitely distinguishes
objects out of backgrounds, set this to
a low sensitivity level. For opposite case
that is hard to distinguish objects like low
illuminated situation, set this to a high
level.
3.
Select <
Size
> tab.
You can limit the minimum/maximum
size of motion to be detected.
•
Minimum Size (pixel) : To set the
minimum size of detected motions,
select <
Minimum Size (pixel)
> and
then point and drag to the desired
size on the screen using the mouse.
•
Maximum Size (pixel) : To set the
maximum size of detected motions,
select <
Maximum Size (pixel)
> and
then point and drag to the desired
size on the screen with your mouse.
J
Motions smaller than the specified minimum size or bigger than the maximum size are not
detected. To avoid unintended detections caused by great and small noises, set minimum/
maximum motion sizes appropriately in accordance to your environments.
Note that same motions on the same location can be differently detected in their detection size;
it is recommended to consider and include the tolerable difference when setting the minimum/
maximum detection sizes.
setup screen
100_
setup screen
