Samsung SNB-6003, Руководство пользователя

Страница: 49 / 176

English _49
●
networ
K connection an
D S
etup
auto network Setup
Run < ip installer_v2.XX.exe > to display the camera search list.
At the initial startup, both [ auto Set ] and [ manual Set ] will be grayed out.
M
`
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
1. Select a camera in the search list.
Check the MAC address of the camera
on the camera’s label.
Both the [ auto Set ] and [ manual Set ]
buttons will be activated.
2. Click [ auto Set ].
The Auto Setting dialog appears.
The < ip address >, < Subnet mask >,
and < Gateway > will be set automatically.
3. Enter the password.
Enter the password of “ admin ” account,
which was used to access the camera.
J
`
For the security purposes, you are
recommended to use a combination
of numbers, alphabets uppercase and
lowercase and special characters for your
password.
` If you want to change the password, refer
to “ Administrator password change ” of
the user setup. (page 76)
4. Click [ oK ].
Auto network setup will be completed.