Samsung SN6000 Series User’s Manual
Connecting External Modules 30
The external module cable must be inserted as shown in Figure 14. To
insert the cable correctly, make sure that
The cable connector labeled System is connected to the
Computer.
The cable connector labeled Unit is connected to the external
module.
Secure the cable by tightening the thumbscrews.
Your computer’s operating system automatically recognises the device
in the SmartBay and configures your computer accordingly.
If the cable does not fit easily, do not force it.
Make sure you have the correct end of the cable
going to the computer and to the external
module.
To remove the cable:
1. Loosen the thumbscrews
2. Pull the cable connectors away from the external module and
the computer.
Using the SmartBay Utility
If your computer shipped with Windows 98, you can use the SmartBay
utility to hot-swap your external modules.
To open the SmartBay utility
1. Click the Start button on the Windows taskbar.
2. Select SmartBay Hotswap Utility.
To remove an external module:
1. Open the SmartBay Hotswap Utility.
2. Select Remove Device and click Ok.
3. Click Yes on the confimation screen
4. Remove the external module by either disconnecting the cable
from the computer or from the external module.
