Samsung SMT-W5100E Скачать руководство пользователя

Страница: 3 / 61

SAFETY CONCERNS

This document provides the information to prevent bodily injury and property damage.
Please make a good use of our product with its description below.

Conventions/Symbols

Warning

Provides information or instructions
that the reader should follow in
order to avoid personal injury or
fatality.

Caution

Indication of a general
caution.

Caution

Provides information or instructions
that the reader should follow in order
to avoid a service failure or damage
to the system.

Restriction

Indication for prohibiting
an action for a product

Note

Indicates additional information
as a reference.

Instruction

Indication for commanding
a specifically required action

Checks

Provides the operator with
checkpoints for stable system
operation.

Warning

WARNING

Power

Do not connect conductive
objects, such as necklace or
coins, to the charging phones
of the battery (metallic part).

The object may explode and
cause fire due to overheating.

Use only the charger
provided with the SMT-
W5100 phone.

Using other chargers can result
in overheating or explosion and
may cause malfunction.

The battery shall be used
only for the SMT-W5100
phone.

Using the battery for other
purposes may cause
malfunction, fire, or electric
shock.

Home Page

Table of Contents

Содержание SMT-W5100E






























































Результаты поиска

Содержание SMT-W5100E

Отзывы:

Похожие инструкции для SMT-W5100E

Бренды по названию

Популярные бренды

Samsung SMT-W5100E, Руководство пользователя

Результаты поиска

Содержание SMT-W5100E

Отзывы:

Похожие инструкции для SMT-W5100E

Бренды по названию

Популярные бренды