16
3. Disassembly and Reassembly
3-5 Replacement of Fuse
Parts
Explaination Photo
Explaination
Fuse
The fuse is located on the noise filter.
1.
Disconnect power and remove grilleand
Assembly Control Box .
2.
Replace the fuse .
3.
When 20A fuse blows out by the operation
of interlock monitor switch failure, replace
the primary interlock switch, secondary
interlock switch, door sensing switch,
interlock monitor switch and power relay .
4.
When the above four switches operate
properly, check if any other part such as the
control circuit board, blower motor or high
voltage transformer is defective .
3-6 Replacement of Drive Motor
Parts
Explaination Photo
Explaination
Drive
Motor
1.
Disconnect power and remove Base
bottom screws(5) .
2.
Remove Base bottom and disconnect the
turntable motor drive .
3.
Remove turntable motor screws(1) and pull
the turntable motor out .
4.
When replacing the drive motor, be sure to
remount it in the correct position with the
coupler .
5.
Connect all the leads to the drive motor .
Fuse
Fuse
Содержание SMH9187ST
Страница 3: ...3 1 Precaution ...
Страница 34: ...34 6 PCB Diagrams 6 2 PCB Diagrams This Document can not be used without Samsung s authorization ...
Страница 35: ...35 7 Wiring Diagrams 7 1 Wiring Diagrams This Document can not be used without Samsung s authorization ...
Страница 36: ...36 7 Wiring Diagrams 7 1 Wiring Diagrams This Document can not be used without Samsung s authorization ...