19
Cooking Instructions
Auto Sensor Cook
The Auto Sensor allows you to cook your food automatically by
detecting the amount of humidity generated from the food while
cooking.
•
When cooking food, the humidity is generated. The Auto Sensor
determines the proper time and power level by detecting the
humidity from the food, eliminating the need to set the cooking
time and power level.
•
When you cover a container with its lid or plastic wrap during
Sensor Cooking, the Auto Sensor will detect the humidity
generated after the container has been saturated with steam.
•
Shortly before cooking ends, the remaining cooking time will begin
its count down. This will be a good time for you to rotate or stir the
food for even cooking if it is necessary.
•
Before auto sensor cooking food may be seasoned with herbs,
spices or browning sauces. A word of caution though, salt or sugar
may cause burn spots on food so these ingredients should be
added after cooking.
•
The More/Less function pad is used to increase or decrease
cooking time. You should use this function to adjust the degree of
cooking to suit your personal taste.
Utensils & Cover For Sensor Cooking
•
To obtain good cooking results with this function, follow the
directions for selecting appropriate containers and covers in the
charts in this book.
•
Always use microwave-safe containers and cover them with their
lids or with plastic wrap. When using plastic wrap, turn back one
corner to allow steam to escape at the proper rate.
•
Always cover with the lid intended for the utensil being used. If the
utensil does not have its own lid, use plastic wrap.
•
Fill containers at least half full.
•
Foods that require stirring or rotating should be stirred or turned
at the end of the Sensor Cook cycle, when the time has started to
count down on the display.
Important
•
It is not advisable to use the Auto Sensor cooking feature on
a continuous cooking operation, i.e. one cooking operation
immediately after another.
•
Install the oven in a well ventilated location for proper cooling
and airflow and to ensure the sensor will operate accurately.
•
To avoid poor results, do not use the Auto Sensor when the
room ambient temperature is too high or too low.
•
Avoid placing the oven near high moisture appliances, since
this will interfere with the proper performance of the Auto
Sensor.
•
Always keep the inside of the oven clean. Wipe all spills with
a damp cloth.
•
This oven is designed for household use only.
SMH7175_00356T.indb 19
2006-04-26 ｿﾀﾈﾄ 1:19:10
