Samsung SMH2117S/XAA Скачать руководство пользователя страница 7

6

General information

7

General information

# 1 and #2 Phillips 

screwdriver

Pencil

Ruler or tape measure and 

straight edge

Carpenter square (optional)

Tin snips (for cutting 

damper, if required)

Scissors (to cut 

template, if necessary)

Electric drill with 

3

/

16

˝, ½˝ and 

⅝˝ drill bits

Filler blocks or scrap wood 

pieces, if needed for top 

cabinet spacing (used on 

recessed bottom cabinet 

installations only)

Gloves

Saw (saber, hole or 

keyhole)

Stud finder or Hammer 

(optional)

Safety goggles

Level

Duct and masking tape

TOOLS YOU WILL NEED

12˝ max.

16 ½˝

30˝

Bottom edge of the 

cabinet needs to be 30˝ 

or more from the cooking 

surface.

Backsplash

30˝ min.

NOTES:

•  The space between the cabinets must be 30˝ wide and 

free of obstructions.

•  This microwave oven is for installation over ranges up 

to 36˝ wide.

•  If you are going to vent your microwave oven to the 

outside, see the Hood Exhaust Section for exhaust 

duct preparation.

• 

If installing the microwave oven beneath smooth 

flat cabinets, be careful to follow the instructions 

on the top cabinet template for power cord 

clearance.

• 

maximum cabinet depth above and beside the 

unit is 12˝.

• 

The dimensions provided are the minimum 

required for mounting the microwave oven. Local 

codes and the practical use of the range will 

likely require you to provide more than the 13.5˝ 

shown between the range and the bottom of the 

microwave.

mOUNTING SPACE

• 

If the unit is damaged in shipment,

 return the unit to the store in which it was bought for repair or 

replacement.

• 

If the unit is damaged by the customer,

 repair or replacement is the responsibility of the customer.

• 

If the unit is damaged by the installer

 (if other than the customer), repair or replacement must be made by 

arrangement between the customer and installer.

DAmAGE - SHIPmENT/INSTALLATION

ADDITIONAL PARTS

PART

qUANTITY

Top Cabinet 

Template

1

Rear Wall Template

1

Installation 

Instructions

1

Separately Packed 

Grease Filter

2

Exhaust adaptor

1

PARTS INCLUDED

SMH1816_XAA-DE68-03943A-02-EN_120725.indd   7

2012-07-25   �� 7:49:13

Содержание SMH2117S/XAA





















Отзывы: