DRAFT
Internal Use Only
Changing Your Settings 239
4.
Toggle the
Media audio
field to activate/de-activate the
Bluetooth device’s headset functions.
Note:
If callers can not hear you during a call while using a paired
Bluetooth headset (with built-in microphone), verify the
Call
audio
option is enabled within the entry’s Bluetooth Settings
page.
Disconnecting a Paired Bluetooth Device
Disconnecting a paired device breaks the connection between the
device and your phone, but retains the knowledge of the pairing. At a
later point when you wish to reconnect the device, there is no need
to setup the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap the previously paired
device (from the bottom of the page).
3.
Tap
OK
to confirm disconnection.
Note:
Disconnections are manually done but often occur automatically
if the paired device goes out of range of your phone or it is
powered off.
