English-8
Switching On and Off
The mains lead is attached to the rear of the STB.
☛
If you have purchased this STB in the United Kingdom,
refer to page 27 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate power socket.
Result:
The Standby indicator on the front of the STB lights up.
➣
Mains voltage : 220 - 240V~, 50/60Hz.
2
Press the “
” button on the front of the STB to switch on.
➢
The LED will be amber when the STB initialises. The LED will
be green when ready to use.
3
To switch off, press the “
” button again.
Placing in Standby Mode
Your STB can be placed in Standby mode, in order to reduce the
Power consumption.
1
Press the
STANDBY
( ) button on the remote control.
Result:
The screen is turned off and the red standby indicator
on the front of the STB lights.
2
To switch back on, simply press the
STANDBY
( ) button again.
Front of the STB
