Samsung SIR-60, Руководство пользователя

Страница: 8 / 17

COLOR DOME CAMERA User’s Manual
14
COLOR DOME CAMERA User’s Manual
15
Function Setup switch
Operating Your Camera
• As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
*Standard voltage for camera operation : DC 12V ±10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
• Be sure to connect power only after all the installation is complete.
• Ground should be connected to the GND terminal.
Notes
When the resistance value of copper wire is at [20°C(68°F)]
Menu Configration
Menu Setup
Copper wire size (AWG)
#24(0.22mm 2 ) #22(0.33mm 2 ) #20(0.52mm 2 ) #18(0.83mm 2 )
Resistance (Ω/m)
0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.028 0.018 0.011 0.006
Setup Menu
LENS SHADE ● ON ● OFF
EXPOSURE
● SHUTTER ● AGC ● SENS-UP
● RETURN
WHITE BALANCE
● ATW ● MANUAL ● AWC
→
SET
● OUTDOOR ● INDOOR
BACKLIGHT ● BLC ● HLC ● OFF
SSNR
●
ON
●
OFF
DAY/NIGHT
●
COLOR
●
B/W
●
AUTO
IMAGE ADJUSTMENT
(IMAGE ADJ.)
●
V-REV
●
H-REV
●
D-ZOOM
●
SHARPNESS
●
RETURN
SPECIAL
● CAMTITLE … ● SYNC ● MOTION DET
●
PRIVACY
… ●
DIS
… ●
LANGUAGE
●
IR MODE
●
RESET
… ●
RETURN
EXIT
Connection
Use the Function Setup switch beside of the lens.
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
8.SPECIAL
9.EXIT
Select the function by
moving up or down direction
of function setup switch. Change the status by
moving the setup switch
left or right.
• An item with the icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
• An item with the - - - icon is unavailable due to function settings.
Notes