Samsung SHS-3420, Руководство пользователя, Страница: 11 / 28

11
Symbols Description Symbols Description
Enter the User PIN Code (4~12
digits).
Repeat the process inside the
rectangle.
Touch the Card reader with the
User Card.
Press the [OPEN/CLOSE] button.
Enter the User/Management
Number. Can be set from 1 to 70.
Sound Icon Display.
Sound Description
Fur Elise
Tiritiritiriririri
Low voltage warning sound
accompanied with [OPEN/CLOSE]
button flashing red.
Ding Button input sound
Ding dong ding dong
Error sound
Ding dong dang Success sound
Ding dong Input standby sound
Toot~ toot~ (10 seconds)
Malfunction prevention warning
Ti~ ti~ ti~ ti~ (5 minutes) Intrusion Detection/Out-of-home Security warning
Too~~t, too~~t
Double locking sound
Double Authentication Mode :
This mode requires both User Card and PIN Code to open the door,
ensuring more security. However, Master PIN Code can open the door regardless of mode. This mode is
disabled by default.
Double-locking :
Double-locking prevents the lock from being unlocked from the outside. You can enable
it by using the Double lock lever.
Emergency Power Supply :
Continuing to use the lock without replacing batteries when required will
lead to the batteries discharging and cause the lock to malfunction. You can open the door by touching the
external power contacts on the Exterior Unit with a 9V battery and then touching with the Card or entering
the PIN Code.
Indicator Lamp :
Indicates the operational status when the Card is being read or the lock is in operation.
Infrared Ray Sensor :
This sensor detects movement on the inside with an infrared ray when the door
opens by pressing [Open/Close] button. It prevents the door being opened by abnormal methods. You can
enable or disable this sensor. This sensor is disabled by default.
Intrusion Detection Function :
When the Interior Unit is forcibly detached while the door is locked, it is
detected by the magnetic sensor and an alarm is sounded. (The function is not activated when the magnet is
not used.)The Intrusion Detection function is a basic function and cannot be enabled or disabled.
Locking Mode (Auto/Manual) :
You can enable or disable the function for locking the door automatically
when it is closed. The factory default is ‘Auto mode’.
- Auto: The door is locked automatically 2 seconds after it is closed. However, it does not function if the mag
-
net is not used or the batteries are completely discharged.
- Manual: When the door does not lock automatically when it is closed, pressing the [
Wake-Up
] button or the
[
OPEN/CLOSE
] button on the Interior Unit will lock the door.
Low Voltage :
Refers to the state when the operating voltage of the lock is lower than the standard voltage,
and activates the Low Voltage Alarm (“Fur Elise”) to indicate that the batteries need to be replaced. Use the
Emergency Power when the batteries are completely discharged.
Magnetic Sensor :
Detects the opening and closing of the door.
Malfunction Prevention Function (Mischief Prevention Function) :
When more than 5 failed au-
thentication attempts with unregistered PIN Codes/Cards occur, a warning sounds for 10 seconds, and the
lock stops operating for 3 minutes. While lock operation is stopped, a ‘beep’ is sounded every 10 seconds
and the lock is activated again automatically after 3 minutes. The Malfunction Prevention function is a basic
function and cannot be enabled or disabled.
Manual Switchgear :
When the batteries are completely discharged, this device is used to mechanically
lock or unlock the door from inside.
Master PIN Code :
You can enter only one Master PIN (4-12 digits) Code. You can register the User PIN
Codes/Cards after authenticating with the Master PIN (4-12 digits) Code. You can open the door with the
Master PIN Code, and the factory default is ‘
1234 ’.
OPEN/CLOSE Button :
A one-touch button to open the locked door. (It is also used to lock the door from
inside in the Manual locking mode.)
Out-of-Home Security Function :
This function prevents intrusions from outside when no one is home.
Pressing the [OPEN/CLOSE] button while the Out-of-Home function is enabled sounds an alarm. You can
enable this function with either the Master PIN code or the User PIN Codes.
Random Security Function :
This mode prevents the disclosure of the PIN Code by entering the PIN
Code after authenticating 2 arbitrarily selected numbers. When the buttons for 2 arbitrarily selected numbers
are illuminated, pressing the 2 illuminated buttons illuminates the whole number pad. You can enable or dis
-
able the Random Security function. This function is enabled by default.
|
Definitions
Double-locking enable Double-locking disable