manualshive.com logo in svg

Samsung SHR-6080, Руководство пользователя, Страница: 33 / 122

Поделиться
Скачать
Samsung SHR-6080 Скачать руководство пользователя страница 33

English

 

_33

 LIVE

EVENT MONITORING

This will display the channel in sync with a specifi c event (Sensor/Motion/Video Loss) if it occurs.
In “

Monitor

>

Event Display

”, set the event monitoring to ON/OFF and specify the event display time. 

(Page 47)

If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events: 4-split mode
- 5~9 events: 9-split mode
- 10~16 events: 16-split mode

If the second event occurs within the set time of <

Event Display

>, the fi rst event will last until the second 

one is terminated. (Page 47)

Ex : If you set <

Event Display

> to 5 seconds, and only one event occurs in CH 1.

Ex : If you set <

Event Display

> to 5 seconds, and the second event occurs in CH 2 within the set time after the fi rst event 

occurred in CH 1.

Press the [

ALARM

] button to reset the alarm settings and to release the event mode.

If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will 
be performed.

This will also apply to the Spot Out monitor.

•

•

M


CH1

Event occurrence

5 seconds

Stop alarm

CH1

CH2

CH1

Event occurrence

4 seconds

9 seconds

Stop alarm

Содержание SHR-6080



























































































































Отзывы:

Нет отзывов